DURAJOINT® ULTRA-TITE GUNABLE HYDROPHILIC WATERSTOP
Durajoint® Ultra-Tite is a moisture swelling single component, gunable water-swelling sealant. It is designed for use as a standalone waterstop in Cast-In-Place joints, Precast joints, and for use as a hydrophilic waterstop adhesive for Durajoint® waterstops.
- Applications
- Properties
- Packaging
- Instructions & Storage
Durajoint® Ultra-Tite can be used in various applications including:
- Cast-In-Place joints
- Precast joints
- Durajoint® waterstop adhesive
- Foundation joints
Add your content here…
| Property | Typical Value |
|---|---|
| Skin Time (min. @ 77°F at 50% RH) | 60 |
| Cure Rate (77°F at 50% RH) | 1/8″ Bead per 40 hours |
| Gun Grade | Zero Slump |
| Tensile Strength | 159 psi |
| Shear Strength | 188 psi |
| Elongation % | 185 |
| Adhesion to Primed Concrete | 30 pli |
| Shore A | 35 |
| UV Stability | No Change |
| VOC | 20.6 g/L |
| Service Temp | -40°F – 220°F |
Packaging
10.3oz Tube. 24 Tubes/Carton or 80 Cartons/Pallet.
20.2oz Sausage. 20 Sausages/Carton or 60 Cartons/Pallet.
Instructions
- The substrate must be clean, frost free, and free of any oils/greases to incompatible sealers that may interfere with adhesion. Do not apply if surface us contaminated.
- Cut nozzle to desired bead size. Ultra-Tite may be factory or field applied. Best applied in 40°F – 70°F, see TDS for details.
- Work Durajoint® Ultra-Tite into rough surfaces to optimize surface contact. If applying to concrete, make sure the concrete is cured before application.
- Clean excess material with a solvent such as alcohol. Cured Ultra-Tite can be removed mechanically.
Storage & Shelf Life
Material must be stored under controlled and dry environment. Be sure to rotate inventory. Use within 12 months from manufacture date.