Dura-Tite® Chloroprene Rubber Hydrophilic Strip Applied Waterstop

Dura-Tite® is a durable construction joint waterstop that is easy to install in non-moving joints. It is composed of non-bentonite chloroprene rubber. It should be used primarily in site formed concrete joints where limited movement is expected. Dura-Tite® protects a joint from the passage of water by creating a watertight seal with the joint. Joints with excessive movement will diminish this watertight seal and compromise the effectiveness of the seal.

Expand-Tite® Bentonite Hydrophilic Strip Applied Waterstop

Expand-Tite® is a flexible concrete construction joint waterstop that is easy to install in non-moving joints. It is composed of bentonite clay and butyl rubber to withhold it’s physical integrity after expanding. It expands in a controlled fashion when exposed to moisture and will not expand beyond a point where the hydration process reduced the effectiveness of the waterstop.

Ultra-Tite Moisture Swelling Hydrophilic Sealant / Waterstop

Ultra-Tite is a single component, gunable water-swelling sealant. It is designed for use as a standalone waterstop in cast-in-place joints, precast joints, pipe penetrations, or other annular-like space. Ultra-Tite can be used in construction applications such as concrete cold joints, irregular joints, rough surfaces, pipe or circular penetrations, precast segment sealant, and much more.

Adhesive Primer

For use on concrete, plastic, and metal surfaces; Durajoint® Adhesive Primer is used to bond Dura-Tite®, Expand-Tite® and Seal-Tite waterstops to various substrates prior to concrete placement. Recommended for use on vertical and horizontal installations when necessary.